Bevel helical gearboxes combine the best of two worlds. An initial bevel gear stage turns the drive through 90°, and helical gear stages then transmit high torque efficiently. These right-angle gearboxes drive many heavy machines that must turn the drive through a corner without losing performance. On a conveyor, mixer or pump, a bevel helical unit turns the power flow compactly and with minimal loss. They run more quietly and efficiently than worm right-angle drives. This makes them well suited to continuous duty and high-power applications. The IRK Series bevel-helical gearboxes show this with their robust build and smooth power transmission. As a result, they work reliably in cranes, crushers and other torque-intensive equipment.

High-Torque Power at Right Angles
Industrial operations often need to deliver large torque in a tight layout. For example, a vertically mounted motor may drive a horizontal conveyor pulley. Similarly, a mixer may sit at a right angle to its motor. In such cases, bevel helical gearboxes address the need to redirect drive rotation while handling heavy loads. Pure bevel gearboxes can suffer from noise and vibration at high loads. However, the IRK’s combined helical stages ease these issues by smoothing out the torque transfer.
The angled teeth of the helical gears engage gradually and share the load across several points of contact. This lets the gearbox run quietly and efficiently. This means less heat generation and reduced strain on components during continuous use. Moreover, selecting the unit with a suitable service factor lets it endure shock loads without failing. A rock crusher starting up full of material is a typical case. By delivering high torque at 90° turns in the drivetrain, these gearboxes solve a basic layout challenge.
I-MAK IRK Series Bevel Helical Gearboxes
Advanced Drives offers the I-MAK IRK Series bevel helical gearboxes to meet these requirements. The IRK Series is built for the long haul. I-MAK machines its monobloc GG20 cast iron housing to tight tolerances, which keeps the bevel and helical gear stages accurately aligned. As a result, the gearbox can carry heavy radial and axial loads on its output shaft without internal misalignment. A conveyor belt drum, with its weight and belt tension, is a typical load.
Each IRK unit is a right-angle drive with up to three gear stages. A bevel gear set makes the 90° turn, and one or two helical reductions then reach the desired output speed. This arrangement gives high torque at a right angle. It also wastes far less energy as heat than a worm gearbox of a similar ratio. The gear design also runs more quietly under load. That matters for equipment working near people.
Ten housing sizes cover rated torques from 160 Nm to 18,000 Nm. Geared motors run from 0.12 kW to 200 kW. Ratios run from 4:1 to 21,000:1, so very low output speeds are possible for heavy lifting or mixing duties. For convenience, we can supply the IRK Series with a direct motor or an IEC adapter, or as a standalone speed reducer. In essence, the IRK line provides a high-efficiency, high-reliability solution whenever a right-angle drive is needed in a tough application.
Key Product Features
- Rugged High-Precision Gearing: The IRK Series features hardened and ground bevel and helical gears. They mesh accurately for high torque transfer and efficiency. The gear design combines strength with low noise and low vibration.
- Compact, Space-Saving Design: By integrating a right-angle stage, IRK gearboxes let you mount motors in tight spaces or alongside machinery. The unit’s optimised geometry gives high output torque in a smaller envelope. This suits confined layouts or the replacement of larger worm drives.
- Long Service Life: Built “to last,” these gearboxes use robust bearings and oil bath lubrication for long-term, low-maintenance operation. The heavy-duty housing and high-quality gears give quiet, low-maintenance running, even under continuous heavy loads.
- Efficiency and Service Factor: Bevel helical gearing is more efficient than a worm gearbox at the same ratio. Therefore, the motor runs cooler and uses less energy. Choosing a suitable service factor gives extra capacity to handle shock loads or overloads without damage.
- Versatile Mounting & Integration: IRK gearboxes can be foot, flange or shaft mounted with a torque arm, to suit your equipment. We can supply them as geared motors or as gearboxes with input adapters. Either way, they fit straightforwardly into conveyors, mixers or pumps.
Common Applications for Bevel Helical Gearboxes
You will find bevel helical gearboxes wherever a heavy load needs a right-angle drive. Common use cases include:
- Conveyors & Elevators: Right-angle drives for belt conveyors, bucket elevators and screw conveyors. They help where the motor must sit beside the conveyor. Inclined conveyors often use IRK units with backstops to stop heavy loads rolling back.
- Mixers & Agitators: Large mixers, pugmills and agitators use vertically mounted bevel helical gearboxes. They deliver high mixing torque while the motor sits horizontally. The IRK’s robust bearings handle the mixer drum’s thrust and side loads.
- Crushers & Mills: Rock crushers, shredders, and rolling mills require very high torque at moderate speeds. IRK drives provide the needed reduction and durability, turning motors 90° to fit into crusher housings or mill stands.
- Hoists & Winches: Many cranes and hoists utilise helical bevel gear motors to turn drum reels. The IRK series, with its high efficiency and compact form, lifts smoothly with little gearbox heating. It can also have a brake motor for load holding.
- Pumps & Fans (Right-Angle): Some large pumps and fans use one to link a vertical motor to a horizontal shaft. This saves floor space while maintaining high mechanical efficiency.
Illustrative example: reviewing a quarry conveyor drive
A conveyor with an overheating worm drive is a candidate for investigation, not an automatic gearbox substitution. Establish running and starting torque, speed, loading, lubrication and thermal conditions. An IRK bevel-helical unit can then be compared with the existing arrangement at the required operating point.
Check mounting dimensions and the stopping or reverse-motion requirements before specifying any brake or backstop. Energy use, noise and reliability should be assessed and measured for the completed system. This example does not report a customer retrofit or promise a year without stoppages.
Conclusion
Bevel helical gearboxes like the IRK Series deliver reliable, high-torque drives in a right-angle configuration. This makes them indispensable in heavy industry. By offering efficient power transmission and robust construction, they ensure that critical machinery operates with minimal downtime. Advanced Drives is ready to help you modernise your equipment with IRK Series gearboxes. We can help with everything from selecting the model to installation support.
Contact us today to learn how our bevel-helical drive solutions can improve your system’s performance and durability, whether it’s for a conveyor, crusher, or any other right-angle drive requirement.