Home › Sectors › Steel and metal
Gearboxes for Steel and Metal Processing
Roll-forming, conveyor and hoist drives, from the official UK supplier of I-MAK.
Home › Sectors › Steel and metal
Roll-forming, conveyor and hoist drives, from the official UK supplier of I-MAK.
Special I-MAK gear units for roll-forming lines, and gearboxes and geared motors for the conveyors, rolling mills, hoists and material handling in steel plants.
Steel and metal
Steel plants run heavy loads around the clock, in harsh conditions. I-MAK builds gearboxes for heavy-duty conveyors, rolling mills and hoisting systems, and special gear units for roll forming.
I-MAK designs these drives for low maintenance, with durable housings and optimised lubrication, and adapts its gearbox lines to the process: rolling mills, hoisting systems and material handling.
Its work covers foundries, steel factories and steel treatment, including panel cutting, rotators, press lines, and drilling and sawing lines. Tell us about your line and we will match the right unit to each drive.
Roll forming
I-MAK ranges
Start with the roll-forming units, then the drives around the line. Each range page has the full size tables and downloads.
Roll forming
Twin input units that sit in a row along a roll-forming line, ratio 1.812:1.
Special
AD spur units and ADS worm and spur units, each with two output shafts for the upper and lower rolls.
Parallel shaft
Parallel shaft geared motors for conveyors, hoist drives and crane travel drives.
Lifting
Hoist drum drives for cranes, for loads from 0.5 to 75 t.
Monobloc
Monobloc gear units up to 70,000 Nm for heavy, continuous duty.
Not sure which?
We will choose the range and size for you.
Applications
The machines I-MAK names for the steel industry.

Roll-forming lines with AD, ADS and ADK units. I-MAK names the ADK and ADS for steel and aluminium profiles, pipes and cable trays.

Drives for panel cutting and press lines.

Conveyors that move steel through the plant, with YP geared motors.

Geared motors for drilling and sawing lines.
Before you choose
Roll-forming and steel plant drives are often matched to an existing layout. These details help us choose the right unit first time.
How many stands, the shaft centres, and whether the units are driven in a row from one motor.
At each output shaft, and the motor power and speed driving the line.
Hours per day, continuous or stop-start running, and any shock loads from the process.
If you are replacing a gearbox, the type code from the nameplate, photos, and the shaft and mounting dimensions.
Let’s find your gearbox
We just need three details.
Replacing one? Send us the type code from the nameplate and a photo, and we will work from those.
1
The line or machine, and what each gearbox drives.
2
Torque and speed at each output, and hours per day.
3
From the nameplate, if you are replacing a unit.
Prefer us to call you? Request a callback.
FAQs
Anything else? Call +44 (0)1535 655151 or email sales@advanced-drives.com.
The AD, ADS and ADK ranges. The AD is a 1:1 spur gear unit and the ADS a worm and spur unit, each with two output shafts. The ADK has two input shafts on one axis, so a row of units can run from one or two motors.
No. The AD, ADS and ADK are supplied without a motor and are driven through their input shafts. Tell us the motor and line speed and we will check the ratio.
Yes. The IRC is built to drive crane hoist drums, for loads from 0.5 to 75 t, and the YP is used for hoist and crane travel drives.
Often, yes. Send us the nameplate details, the shaft and mounting dimensions, and photos, and we will check whether an I-MAK unit fits.