Home › Products › 4DS series

I-MAK 4DS Series Aerator Gear Units

Aerator and mixer drive, up to 18,547 Nm and 90 kW.

Three sizes of gear unit for aerators, mixers and agitators, with the motor fitted through an adapter and coupling. Genuine I-MAK units, supplied and supported from Silsden, West Yorkshire.

Get a priceSend us your nameplate details
I-MAK 4DS aerator gear unit

18,547Nm

Output torqueThe highest in I-MAK’s tables, for the 4DSM 750.

90kW

Motor powerFrom 1.5 kW, with 4, 6 and 8 pole motors.

3sizes

Housing sizesThe 4DSM 480, 615 and 750.

145:1

Ratio rangeFrom 8:1, for output speeds of 4.8 to 175 rpm.

Overview

The I-MAK 4DS: a gear unit for aerators, mixers and agitators

The I-MAK 4DS series is built to drive agitators, mixers and aerators, with three stages of gearing and a solid output shaft. Three housing sizes cover output torques from 875 Nm up to 18,547 Nm, with motors from 1.5 to 90 kW.

In I-MAK’s tables and parts list the series appears as the 4DSM. The motor fits on a mounting adapter and drives through a coupling, and the unit can be foot or flange mounted. I-MAK designed it to take high loads directly on the shaft, and its performance tables list radial load values (FQl0) of up to 118,000 N for the largest size.

For heavy and complex duties, I-MAK offers extra sealing, pump-fed forced lubrication with an expansion tank, and cooling by fan, radiator or heat exchanger. Output speeds run from 4.8 to 175 rpm across the three sizes.

Advanced Drives is the official UK supplier of I-MAK gearboxes and motors. For background on drives for this kind of plant, read our guide to water treatment drives.

Which I-MAK gearbox?

Choose the 4DS for an aerator, mixer or agitator

Key advantages

Why choose an I-MAK 4DS

Up to 18,547 Nm

Three housing sizes, with output torque up to 18,547 Nm in I-MAK’s tables.

High loads on the shaft

Designed to take high loads directly on the shaft; I-MAK’s tables list radial load values (FQl0) up to 118,000 N.

Foot or flange mounted

The unit can be foot or flange mounted, to suit the structure it sits on.

Extra sealing

Sealing options include fluoroelastomer (FKM) seals, special seal layouts and a bearing seal ring.

Cooling and forced lubrication

Fan, radiator and heat exchanger cooling, and pump-fed forced lubrication, as options.

Clear oil change intervals

A first oil change after 500 hours, then one every 6,000 hours.

360° view

↻ Click and drag to rotate

Technical data

I-MAK 4DS technical specifications

Three housing sizes, each driven by a motor through an adapter and coupling. The catalogue gives no single torque rating per size, so the torque figures below are the highest output torques I-MAK lists for each size at a service factor of 1.00 or more; the right size depends on your aerator or mixer duty, and we check that for you.

Size 4DSM 480 4DSM 615 4DSM 750
Highest output torque in the tables (Nm) 6,433 12,245 18,547
Ratios 8:1 to 145:1 13.1:1 to 141:1 16.5:1 to 140:1
Output speeds (rpm) 4.8 to 175 5 to 107 5 to 85
Motor frames 90 L to 225 M 160 M to 250 M 160 L to 280 M
Output shaft diameter (mm) 105 115 125
Radial load, FQl0 (N) 65,000 to 75,000 85,000 to 100,000 98,000 to 118,000
Oil quantity (litres) 25 35 45
Common to every size 4DS series
Gearing Three gear pairs, driven by a motor through an adapter and coupling
Output torque 875 to 18,547 Nm
Ratios 8:1 to 145:1
Output speeds 4.8 to 175 rpm
Motor power 1.5 to 90 kW, with 4, 6 and 8 pole motors
Standard motor 400 V 50 Hz, IP 55, class F insulation, IE3 efficiency
Output Solid shaft with key
Mounting Foot or flange mounted; mounting positions P1 to P4
Lubrication CLP mineral or CLP HC synthetic gear oil to DIN 51517-3, chosen for the operating temperature
Oil changes After the first 500 hours, then every 6,000 hours
Motor ambient temperature 0 to 40 °C as standard; ask us outside this range

Torques, ratios, speeds, radial loads and motor frames are from I-MAK’s 4DSM performance tables, gear stages from its parts list, and output shaft diameters from I-MAK’s 4DS product data. Source: I-MAK 4DS catalogue 2024, Rev.00.

Options

Options and configurations

Options are added to the type code, so a replacement can be matched exactly.

Cooling

Fan or radiator cooling, or a plate, tubed or brazed heat exchanger, where the unit needs extra cooling.

Forced lubrication

Pump-fed forced lubrication (216), with an expansion tank (217) if needed.

Seals

Fluoroelastomer (FKM) seals, special seals and covers, and a bearing seal ring (218).

Output shafts

A solid shaft with key as standard, or one made to special dimensions or materials, hardened, threaded or with multiple keys.

Motors

IE4 efficiency, IP 54, 56, 65 or 66, class B or H insulation, special voltages and frequencies, or an explosion proof motor. Another make of motor can be fitted on an IEC flange.

Brakes, encoders and backstop

A motor brake, with hand release or as a double brake, an encoder, an external fan, or a backstop bearing for clockwise or anticlockwise rotation.

Motor protection

A PTC thermistor, a bimetallic switch, a PT 100 sensor or a 110 V or 220 V heater, and motor bearings for hot or cold surroundings.

Oil, paint and monitoring

Synthetic or food-compatible oil, a low temperature oil for use down to -40 °C, an oil temperature sensor (OTS), and epoxy, outdoor acrylic or anti-corrosion paint.

Applications

Where 4DS gear units work

I-MAK designed the 4DS for agitators, mixers and aerators, and offers it to the waste and water treatment industry: slow drives that carry high loads directly on the output shaft.

Geared motor driving a surface aerator

Aerators

Aerator drives, with high loads taken directly on the shaft

Mixers

Mixer drives, at output speeds from 4.8 to 175 rpm

Agitators

Agitators that keep the contents of a tank moving

Water treatment

Aeration and mixing in water treatment plant

Wastewater treatment

Aerators and mixers in wastewater basins and tanks

Waste treatment

Mixers and agitators in waste treatment

Downloads

I-MAK 4DS downloads

Current documents and tools from I-MAK. No forms, no sign-up.

4DS series catalogue

2024, Rev.00 · Sizes, ratings, options and dimensions · PDF

Download

Online configurator

I-MAK iGuide, for choosing a gearbox online

Open

Dimension drawing

For your exact size and options · On request

Ask us

Can’t find it?

Need the drawing for your exact unit?

Send us the type code from the nameplate, or your torque and speed, and we will send the right drawing.

Replacing a gearbox

Replacing an existing 4DS

Every I-MAK gear unit carries a nameplate. Send us the details on it, with a few photos, and we will match the replacement.

Read the type code

A 4DS type code is the series and the housing size, such as 4DS 615, with any options after a slash, as in 4DS 615 / OTS – 111 – 363. In I-MAK’s performance tables it appears as the 4DSM, followed by the motor.

What to send us

The type code, ratio, motor power and serial number from the nameplate, photos of the nameplate, shaft and mounting, and what the unit drives, such as an aerator or mixer.

Mounting position

Tell us how the unit is mounted and which way up. I-MAK lists mounting positions P1 to P4, and the unit holds 25, 35 or 45 litres of oil, depending on size.

Replacing another make

We can often replace a gearbox from another maker with an I-MAK unit. Send us the nameplate, shaft and mounting details and we will check the fit.

Spares and repairs

Ask us for I-MAK spares such as seals and bearings; the parts list in the 4DS catalogue helps identify them. Need a repair rather than a replacement? Call us and we will talk it through.

Type code

How to read a 4DS type code

  1. Series: 4DS, written 4DSM in I-MAK’s tables and parts list
  2. Housing size: 480, 615 or 750, such as 615
  3. Options: codes after the slash, separated by hyphens
  4. OTS: an oil temperature sensor
  5. 111: special output shaft dimensions
  6. 363: an IE4 motor, in place of the standard IE3

Let’s find your gearbox

Looking for a 4DS gear unit or a price?

We just need three details.

Replacing one? Send us the type code from the nameplate and a photo, and we will work from those.

1

What it drives

An aerator, mixer or agitator, and the output torque or power it needs.

2

Output speed

Output rpm or the ratio, and the motor power and speed if you already have them.

3

Duty and mounting

Hours per day, foot or flange mounting, and whether it runs outdoors.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

I-MAK 4DS questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-drives.com.

I-MAK designed the 4DS series for agitators, mixers and aerators, and offers it to the waste and water treatment industry. Output speeds run from 4.8 to 175 rpm, and the unit is designed to take high loads directly on its shaft.

Output torque runs from 875 Nm up to 18,547 Nm, the highest value in I-MAK’s catalogue tables, for the 4DSM 750. The right size depends on the load, speed and hours, so tell us your duty and we will check it.

I-MAK’s ordering code uses 4DS, while its performance tables, oil table and parts list, all in the 4DS catalogue, use 4DSM. In the performance tables the size is followed by the motor, such as 4DSM 615 / 160 M 8b. I-MAK does not explain the extra M, so send us whichever appears on your nameplate.

Yes, as options. I-MAK lists fan and radiator cooling, plate, tubed and brazed heat exchangers, pump-fed forced lubrication and an expansion tank.

A CLP mineral or CLP HC synthetic gear oil to DIN 51517-3, with the grade chosen for the operating temperature. The unit holds 25, 35 or 45 litres depending on size; change the oil after the first 500 hours, then every 6,000 hours.

Often, yes. Send us the nameplate details, the shaft and mounting dimensions, and photos, and we will check whether a 4DS fits.