Home › Sectors › Water and wastewater

Gearboxes for Water and Wastewater

Drives for aerators, mixers and pumps, from the official UK supplier of I-MAK.

I-MAK gearboxes for the whole treatment cycle, from primary to secondary treatment: 4DS units for aerators, mixers and agitators, and drives for pumps, dryers and rotating discs.

Get a priceSend us your nameplate details
An aerator and mixer drive on a treatment lagoon

Water and wastewater

Drives for the whole treatment cycle

Water quality matters to cities and industrial areas alike. I-MAK supplies products for the whole treatment cycle, from primary to secondary treatment, and has developed solutions for water and waste treatment for more than 50 years.

I-MAK designs these drives for outdoor conditions, reduced maintenance costs, and easy assembly and maintenance. Several of its ranges, including the YP, offer paint systems for EN 12944 corrosion categories C2 to C5, and the 4DS has epoxy and anti-corrosion paint options.

For aerators, mixers and agitators, I-MAK makes the 4DS: three sizes up to 18,547 Nm, with forced lubrication and five cooling options available.

Where I-MAK works

Water and waste treatment

  • Water treatment works
  • Waste treatment
  • Dryer pools
  • Pumps, dryers and rotating discs
  • Aerators, mixers and agitators

I-MAK ranges

I-MAK ranges for water and wastewater

Start with the 4DS for aerators and mixers. Each range page has the full size tables and downloads.

I-MAK 4DS aerator gear unit

Aerators and mixers

4DS aerator gear units

I-MAK’s gear units for aerators, mixers and agitators in water and waste treatment, up to 18,547 Nm.

I-MAK IR helical geared motor

Helical, inline

IR helical geared motors

Inline helical geared motors that I-MAK names for pumps and mixers.

I-MAK IPR planetary gearbox

Planetary

IPR and IPRK planetary gearboxes

Planetary gearboxes; I-MAK’s load classification tables include water treatment aerators and screw pumps.

I-MAK YP parallel shaft geared motor

Parallel shaft

YP parallel shaft geared motors

Parallel shaft geared motors, with EN 12944 C2 to C5 paint systems for outdoor plant.

I-MAK three-phase asynchronous motor

Motors

Three-phase motors

Motors IP55 as standard, with IP56, IP65 and IP66 options.

Not sure which?

Tell us the duty

We will choose the range and size for you.

  • Torque and speed at the output
  • Hours per day and starts per hour
  • How the unit is mounted
  • Or the nameplate, if you are replacing one

Applications

Where I-MAK units work in water and wastewater

The machines I-MAK names for water treatment: aerators and mixers, pumps, dryers and rotating discs.

Grey I-MAK 4DS aerator gear units

Aerators and mixers

4DS gear units for aerators, mixers and agitators.

A blue vertical drive in a treatment works

Pumps

Geared motors for pumps across the treatment cycle.

A water treatment works from the air

Dryers and rotating discs

Drives for dryers and rotating disc units, from primary to secondary treatment.

Before you choose

What we need to know for a treatment works drive

Treatment works drives run outdoors and around the clock. These details help us choose the right unit.

Outdoor conditions

The site and its exposure, so we can choose the paint system, seals and motor.

The aerator or mixer

The impeller or rotor, its speed, and the loads on the output shaft.

The duty

Hours per day, starts per hour, and whether it runs continuously.

The existing unit

If you are replacing a gearbox, the type code from the nameplate and photos.

Let’s find your gearbox

Need a gearbox for a treatment works?

We just need three details.

Replacing one? Send us the type code from the nameplate and a photo, and we will work from those.

1

Machine

The aerator, mixer or pump, and how the drive is mounted.

2

Duty

Torque and speed at the output, and hours per day.

3

Type code

From the nameplate, if you are replacing a unit.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Water and wastewater questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-drives.com.

The 4DS, I-MAK’s gear unit for aerators, mixers and agitators in water and waste treatment. It comes in three sizes, 480, 615 and 750, up to 18,547 Nm.

I-MAK designs its water treatment drives for outdoor conditions, and several ranges, including the YP, offer paint systems for EN 12944 categories C2 to C5. Tell us the site conditions and we will choose the paint, seals and motor.

Yes. I-MAK names its IR inline helical geared motors for pumps and mixers. Send us the pump speed and power and we will size the unit.

Often, yes. Send us the nameplate details, the shaft and mounting dimensions, and photos, and we will check whether an I-MAK unit fits.