Home › Sectors › Conveyors

Gearboxes for Conveyors and Material Handling

Shaft mounted gearboxes and geared motors for every kind of conveyor, from the official UK supplier of I-MAK.

I-MAK drives for belt, bucket, screw and roller conveyors, apron feeders and handling equipment: shaft mounted units with a backstop option, and inline, parallel and right-angle geared motors.

Get a priceSend us your nameplate details
A mobile conveyor driven by red I-MAK geared motors

Conveyors

The right drive for every conveyor

Conveyors run in almost every sector we supply, from quarries and recycling plants to grain stores and food lines. I-MAK makes drives for all of them.

I-MAK calls its IRNX shaft mounted gearbox the best solution for conveyors and grain storage, and its IRO the best solution for quarries and mining. Both hang on the conveyor shaft, take a backstop for inclined conveyors, and have housings designed for easy cleaning and dust resistance. The IRNX uses rubber rings as a torque arm, to absorb shocks and vibration.

Where a geared motor suits the layout better, the IR runs in line with the shaft, the YP is a compact parallel shaft unit with a hollow output, and the IRK gives a right-angle drive.

Choosing a conveyor drive

Start with the layout

  • Hung on the conveyor shaft: the IRNX or IRO
  • Motor in line with the shaft: the IR
  • Compact, with a hollow output: the YP
  • Right angle: the IRK
  • Inclined conveyor: add a backstop

I-MAK ranges

I-MAK ranges for conveyors

Each range page has the full size tables, options and downloads.

I-MAK IRNX shaft mounted gearbox

Shaft mounted

IRNX shaft mounted gearboxes

Twelve sizes up to 42,700 Nm for belt, bucket and screw conveyors, apron feeders and roller beds.

I-MAK IRO shaft mounted gearbox

Shaft mounted

IRO shaft mounted gearboxes

Shaft mounted units for inclined conveyors in quarries and mines, with a backstop option.

I-MAK YP parallel shaft geared motor

Parallel shaft

YP parallel shaft geared motors

Parallel shaft geared motors that I-MAK calls perfect for conveyors, with a hollow output shaft.

I-MAK IR helical geared motor

Helical, inline

IR helical geared motors

Inline helical geared motors for conveyors and material handling equipment.

I-MAK IRK helical bevel geared motor

Helical bevel

IRK helical bevel geared motors

Right-angle geared motors for belt and chain conveyors, with a backstop option for inclines.

Not sure which?

Tell us the duty

We will choose the range and size for you.

  • Torque and speed at the output
  • Hours per day and starts per hour
  • How the unit is mounted
  • Or the nameplate, if you are replacing one

Applications

Where I-MAK conveyor drives work

The conveyors and handling machines I-MAK names across its sectors.

A belt conveyor in a factory

Belt conveyors

Shaft mounted or geared motor drives for belt conveyors.

An inclined conveyor feeding a sand stockpile

Inclined conveyors

IRO and IRNX units with a backstop to stop run-back.

Roller conveyors in a warehouse

Roller beds

Drives for roller beds and roller conveyors.

Overhead conveyors in a distribution centre

Material handling

IR geared motors for material handling equipment.

Before you choose

What we need to know about your conveyor

With these details we can size the drive and check the options in one go.

The conveyor

Belt, bucket, screw or roller, the load it carries, and the belt speed.

The layout

Shaft mounted or foot mounted, and where the motor can sit.

The incline

If it is inclined, so we can specify a backstop, and its direction of rotation.

The duty

Hours per day, starts per hour, and whether it starts loaded.

Let’s find your gearbox

Need a conveyor drive?

We just need three details.

Replacing one? Send us the type code from the nameplate and a photo, and we will work from those.

1

Machine

The conveyor type, the load, and how the drive is mounted.

2

Duty

Belt speed or output speed, the torque, and the incline.

3

Type code

From the nameplate, if you are replacing a unit.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Conveyor questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-drives.com.

For a drive hung on the conveyor shaft, the IRNX or IRO. For a geared motor, the IR in line with the shaft, the YP parallel shaft unit or the IRK right-angle unit. Send us the conveyor details and we will size it.

Yes. A backstop stops the output turning back when the drive stops. It is an option on the IRO and IRNX shaft mounted ranges and on I-MAK geared motors. Tell us the direction of rotation.

The conveyor type and load, the belt speed, the pulley diameter, the incline, and the hours per day. Our guide to conveyor torque explains each figure.

Often, yes. Send us the nameplate details, the shaft and mounting dimensions, and photos, and we will check whether an I-MAK unit fits.