Home › Sectors › Mining and quarrying

Gearboxes for Mining and Quarrying

Drives for conveyors, crushers, screens and cement plant, from the official UK supplier of I-MAK.

I-MAK gearboxes built for dust, heavy loads and nonstop work: shaft mounted units with a backstop option for conveyors, and drives for crushers, screens, washers and cement plant.

Get a priceSend us your nameplate details
An I-MAK IRK geared motor driving a quarry conveyor

Mining, quarrying and cement

Made for dust, heavy loads and nonstop work

I-MAK has developed special solutions for quarries for decades. Its gearboxes crush, screen, wash and transport stone and sand every day, in mines and quarries from South Africa to Morocco.

I-MAK’s special gearbox lines are adapted to dusty environments, heavy loads and nonstop working, and to outdoor conditions. A correctly selected backstop helps prevent reverse rotation on an inclined conveyor when the drive stops, and the units are designed for low maintenance.

I-MAK also supplies cement plants and concrete batching plants, for dryers, mixers and conveyors. For hazardous areas it offers explosion-proof motors; certification depends on the unit, so tell us the zone and we will confirm it with I-MAK.

Built for quarries

What I-MAK designs for

  • Dusty environments and outdoor conditions
  • Heavy loads and nonstop working
  • Backstops for inclined conveyors
  • Low maintenance
  • Explosion-proof motor options

I-MAK ranges

I-MAK ranges for mining, quarrying and cement

Start with the shaft mounted units for conveyors. Each range page has the full size tables and downloads.

I-MAK IRO shaft mounted gearbox

Shaft mounted

IRO shaft mounted gearboxes

I-MAK calls the IRO the best solution for quarries and mining, with a backstop option for inclined conveyors.

I-MAK IRNX shaft mounted gearbox

Shaft mounted

IRNX shaft mounted gearboxes

Shaft mounted units for belt and bucket conveyors, apron feeders and screw conveyors, in mining and cement.

I-MAK IRK helical bevel geared motor

Helical bevel

IRK helical bevel geared motors

Right-angle geared motors for conveyors, screens and feeders on dusty, heavy-duty sites.

I-MAK IPR planetary gearbox

Planetary

IPR and IPRK planetary gearboxes

Planetary gearboxes that I-MAK names for mining, with a maximum torque (T2max) of up to 743,990 Nm.

I-MAK MA monobloc gear unit

Monobloc

MA and MK monobloc gear units

Monobloc gear units for heavy loads on a continuous cycle, with an Ex-proof option.

I-MAK three-phase asynchronous motor

Motors

Three-phase motors

Motors to 450 kW, with an explosion-proof version.

Applications

Where I-MAK units work in mines, quarries and cement plants

The machines I-MAK names: crushers, screeners, conveyors and washers, and the dryers, mixers and conveyors of cement plants.

An inclined conveyor building a stockpile

Conveyors

Belt and inclined conveyors, with a backstop to stop run-back.

A crusher feeder in a quarry plant

Crushers

Crusher drives see heavy shock loads, so we size them with I-MAK.

A trommel wash screen

Screens and washers

Drives for screeners and washers on sand and stone.

A limestone quarry

Cement and concrete

Dryers, mixers and conveyors in cement and concrete batching plants.

Before you choose

What we need to know for a quarry or mine drive

Heavy-duty sites need the conditions checked at the start. These details help us choose the right unit.

Variable speed conveyor drives

A variable frequency drive (VFD) controls motor speed, while the gearbox provides speed reduction and torque at the output. For conveyors that run at different speeds, check the motor, gearbox and controls together across the intended operating range.

Tell us the required output speeds, starting and running loads, operating hours and frequency of starts. Low-speed operation can affect motor cooling, so cooling requirements also need to be checked for the duty. Our guide to using VFDs with I-MAK geared motors explains the main selection points.

Dust and weather

Indoor or outdoor, the dust, and the temperature range, for the seals, paint and motor.

Inclines

Whether the conveyor is inclined, so we can specify a backstop, and its direction of rotation.

Hazardous areas

The zone, if there is one, so we can confirm the certification with I-MAK.

Duty and shock loads

Hours per day, starts per hour, and the peak loads from crushing or start-up.

Let’s find your gearbox

Need a gearbox for a quarry, mine or cement plant?

We just need three details.

Replacing one? Send us the type code from the nameplate and a photo, and we will work from those.

1

Machine

The conveyor, crusher or screen, and how it is mounted.

2

Duty

Torque and speed at the output, the incline, and hours per day.

3

Type code

From the nameplate, if you are replacing a unit.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Mining and quarrying questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-drives.com.

I-MAK calls its IRO shaft mounted gearbox the best solution for quarries and mining. The IRO, and the IRNX, which runs to higher torques, both offer a backstop option, which stops the belt running back when the drive stops.

I-MAK lists crushers among its quarry applications. Crusher drives see heavy shock loads, so send us the crusher type, motor power and speed, and we will check the right range and size with I-MAK.

I-MAK offers explosion-proof motors and an Ex-proof version of its MA and MK units. Certification depends on the unit, so tell us the zone and we will confirm it with I-MAK for your exact unit before you order.

Yes. I-MAK supplies cement plants and concrete batching plants, for dryers, mixers and conveyors. The IRNX shaft mounted range is named for the cement industry.