Skip to main content
Advanced Drives
Menu
  • About Us
  • Products
    • Replacement Gearboxes
    • Aerator Type Gearbox 4DS
    • Helical Bevel IRK Series
    • Helical Geared IR Series
    • Helical Worm IRSD Series
    • Planetary Gearboxes IPR / IPRK
    • Hoist Drives IRC Series
    • Industrial A / AE Series
    • Monobloc Extruder MAE / MKE
    • Monobloc MA / MK Series
    • Parallel Shaft Helical YP Series
    • Shaft Mounted IRNX Series
    • Shaft Mounted IRO Series
    • Special Type ADK Series
    • Special Type AD / ADS / IRAEM
    • Worm Geared IRS Series
    • Worm Geared (Aluminium) S Series
    • Three-Phase Motors
  • Sectors
    • Industries & Applications
    • Agriculture and Forestry
    • Conveyors and Material Handling
    • Food and Beverage
    • Mining, Quarrying and Cement
    • Oil and Gas
    • Recycling, Shredding and Waste
    • Steel and Metal Processing
    • Theatre and Stage Machinery
    • Water and Wastewater
  • Resources
    • Knowledge Base
    • Gallery
    • News
    • Configurator
  • Contact Us
    Press enter to begin your search
    Close Search
    Conveyor SystemsKnowledge BaseMining & QuarryingShaft Mounted Gear Units

    Shaft-Mounted Gearboxes: IRO and IRNX Selection Guide

    By Advanced DrivesAugust 15, 2025November 14th, 2026No Comments6 min read

    Shaft-mounted gearboxes fit directly onto the driven shaft through a hollow output shaft. A torque arm restrains the gearbox housing. This can remove the need for a separate output coupling and gearbox base, but the shaft fit, support arrangement and input drive still need to be checked for the machine.

    The I-MAK IRO series and IRNX series are shaft-mounted helical gearboxes used in conveying and bulk material handling. A replacement should be selected against its duty and dimensions, rather than assumed to be a universal drop-in fit.

    On this page: Mounting arrangement | Mounting comparison | IRO and IRNX | Selection checks | Conveyor example

    I-MAK IRO Series shaft-mounted gearbox

    How the shaft-mounted arrangement works

    The gearbox’s hollow shaft fits over the machine’s driven shaft, such as a conveyor head pulley shaft. The torque arm connects the housing to a suitable reaction point. This arrangement reduces the number of separate output-drive components, but it does not make alignment, shaft tolerances or structural checks unnecessary.

    The input drive must also be selected and installed correctly. For a belt-driven arrangement, pulley alignment, belt tension and the resulting shaft loads need to follow the relevant manufacturer’s requirements. Use the installation instructions for the selected gearbox, mounting position and drive arrangement; this overview is not an installation procedure.

    Choosing between shaft, foot and flange mounting

    The mounting choice determines how the drive’s weight and reaction forces reach the machine. Available space matters, but so do shaft support, structural stiffness and access when the unit needs removing.

    Arrangement Main benefit Checks before selection
    Shaft mounted Can remove a separate output coupling and gearbox base Driven-shaft fit and support, assembly weight, torque reaction, input-drive loads and removal access
    Foot mounted Supports the gearbox on a dedicated base Base rigidity, shaft alignment, coupling or transmission loads and guard space
    Flange mounted Connects the unit to a machine face in a compact arrangement Register and bolt pattern, face alignment, structural capacity and the intended bearing arrangement

    A shaft-mounted unit follows the driven shaft, but it is not free from alignment or support checks. The shaft and its bearings must suit the assembly and its forces. Belt-driven inputs still need pulley alignment and correct belt tension. The torque arm must follow the manufacturer’s geometry and restraint arrangement.

    A foot-mounted unit may make disconnection and support simpler, particularly where the machine shaft should not carry the gearbox’s weight. The base must remain rigid under load, and a flexible coupling does not remove the need for alignment. An output chain or belt also introduces shaft loads that require checking.

    A flange can provide a compact connection, but bolting two faces together does not guarantee that their shafts and bearings form a suitable assembly. Check the register, face runout, fits and structural arrangement against the approved drawings.

    Before changing mounting type on an existing machine, compare the support loads, connection details, lubrication orientation and maintenance envelope. A layout that fits neatly may still be difficult to remove or inspect.

    Send Advanced Drives a drawing or photographs of the existing support arrangement, shaft details, required torque and speed, assembly weight limits and available service space. This allows the mounting choice to be assessed alongside the gearbox selection.

    Comparing I-MAK IRO and IRNX gearboxes

    Range Published maximum output torque Range information
    IRO Up to 7,530 Nm IRO specifications, sizes and downloads
    IRNX Up to 42,700 Nm IRNX specifications, sizes and downloads

    These figures describe the top of each range, not the torque available from every size at every speed. The required ratio, operating speed, service factor, shaft dimensions and available space determine the appropriate unit. The IRNX catalogue includes performance tables for different belt-pulley ratios, so the complete motor and pulley arrangement matters.

    A backstop is an option for applications such as an inclined conveyor where reverse movement must be prevented. Confirm the required direction of rotation and the suitability of the backstop for the duty. Its presence does not by itself establish that the complete machine meets its safety requirements.

    What to check before selecting or replacing a gearbox

    • Load and duty: the required output torque, starting load, starts per hour and daily operating hours.
    • Speed: the motor speed, gearbox ratio, any belt ratio and the required driven-shaft speed.
    • Mechanical fit: shaft diameter and tolerances, key arrangement, available shaft length, mounting clearances and torque-arm attachment.
    • Operating conditions: mounting position, lubrication, temperature, contamination and access for inspection.
    • Stopping and reverse movement: the required rotation direction, backstop or braking arrangements and the machine’s safety requirements.

    For an existing drive, send photographs of the nameplate, shaft connection, input drive and torque arm. Include the machine’s duty and any drawings or dimensional measurements. This helps establish compatibility before a replacement is ordered.

    Applications and maintenance

    Typical applications include belt, bucket and screw conveyors, apron feeders and grain handling. Selection still needs to account for the particular material, loading pattern and operating conditions. The I-MAK IRNX product information lists these applications.

    Direct mounting reduces the number of separate components, but does not remove maintenance requirements. Follow the manufacturer’s inspection and lubrication instructions for the selected unit. Check the shaft fixing, torque arm, seals and input-drive components as applicable, and investigate unusual noise, vibration or temperature.

    Illustrative example: assessing a gravel-conveyor retrofit

    For a gravel conveyor being converted to a new motor drive, start with the loaded starting torque, required belt speed and operating hours. Then check the head-pulley shaft dimensions, space for the input drive and a suitable torque-arm reaction point. An inclined conveyor also requires assessment of reverse movement and stopping arrangements.

    Those checks establish whether an IRO, IRNX or another arrangement is suitable. This is a selection example, not a reported customer installation or a promise of fitting time or performance.

    Discuss your shaft-mounted drive

    Contact Advanced Drives with the nameplate details, dimensions and duty. We can help assess an I-MAK gearbox for a new application or replacement.

    Related guidance

    • Understanding Gearbox Mounting Positions for Material Handling – A Practical Guide
    • Replacing an Industrial Gearbox: Dimensional Checks Before You Order

    Contact Advanced Drives about your application.

    Technical references

    • I-MAK IRNX operating guide
    • I-MAK IR YP IRK operating instructions

    Technical reference: I-MAK IRNX catalogue. Use the current documentation for the exact unit selected.

    Tags:

    conveyor gear reducerdrop-in gearboxIRN seriesshaft-mounted gearboxtorque arm drive

    Categories

    Recent Articles

    • Hollow-Shaft Gearbox Connections: Keyed Bores and Shrink Discs Explained November 19, 2026
    • Replacing an Industrial Gearbox: Dimensional Checks Before You Order November 12, 2026
    • How to Size an Industrial Gearbox: From Machine Duty to a Selection Brief November 5, 2026

    Popular Articles

    • Gearbox Selection for Shredder Systems: A Practical Guide August 29, 2025
    • Parallel Shaft Gearboxes – Compact High-Torque Drive Solutions August 16, 2025
    • Helical Worm Gearboxes: Combined High-Ratio Drive Solutions August 13, 2025
    • Previous PostParallel Shaft Gearboxes – Compact High-Torque Drive Solutions

    • Next PostCustom Gearbox Solutions: Engineered Drives for Unique Applications

    Need some help?

    Our experienced engineers are here to help, no matter what stage you're at. Even if you don't know where to start, we're happy to assist with any project, big or small.

    Request a callback
    Advanced Engineering Group logo
    Advanced Actuators logo
    Advanced Automation logo
    Advanced Components logo
    Advanced Drives logo

    About Us

    Advanced Drives is the official UK supplier of I-MAK gearboxes, geared motors and motors, based in Silsden, West Yorkshire. We are part of Advanced Engineering Group, alongside Advanced Actuators, Advanced Automation and Advanced Components. Together, the group covers power, motion and control.

    Let’s Connect

    Ryefield Way, Silsden, West Yorkshire, BD20 0EF

    +44 (0)1535 655151

    sales@advanced-drives.com

    © 2026 Advanced Drives. All Rights Reserved · Privacy · Policies

    • linkedin
    • youtube
    • phone
    • email
    Close Menu
    • About Us
    • Products
      • Replacement Gearboxes
      • Aerator Type Gearbox 4DS
      • Helical Bevel IRK Series
      • Helical Geared IR Series
      • Helical Worm IRSD Series
      • Planetary Gearboxes IPR / IPRK
      • Hoist Drives IRC Series
      • Industrial A / AE Series
      • Monobloc Extruder MAE / MKE
      • Monobloc MA / MK Series
      • Parallel Shaft Helical YP Series
      • Shaft Mounted IRNX Series
      • Shaft Mounted IRO Series
      • Special Type ADK Series
      • Special Type AD / ADS / IRAEM
      • Worm Geared IRS Series
      • Worm Geared (Aluminium) S Series
      • Three-Phase Motors
    • Sectors
      • Industries & Applications
      • Agriculture and Forestry
      • Conveyors and Material Handling
      • Food and Beverage
      • Mining, Quarrying and Cement
      • Oil and Gas
      • Recycling, Shredding and Waste
      • Steel and Metal Processing
      • Theatre and Stage Machinery
      • Water and Wastewater
    • Resources
      • Knowledge Base
      • Gallery
      • News
      • Configurator
    • Contact Us