Home › Sectors › Steel and metal

Gearboxes for Steel and Metal Processing

Roll-forming, conveyor and hoist drives, from the official UK supplier of I-MAK.

Special I-MAK gear units for roll-forming lines, and gearboxes and geared motors for the conveyors, rolling mills, hoists and material handling in steel plants.

Get a priceSend us your nameplate details
Red I-MAK gear units driving a roll-forming line

Steel and metal

Built for heavy loads and nonstop production

Steel plants run heavy loads around the clock, in harsh conditions. I-MAK builds gearboxes for heavy-duty conveyors, rolling mills and hoisting systems, and special gear units for roll forming.

I-MAK designs these drives for low maintenance, with durable housings and optimised lubrication, and adapts its gearbox lines to the process: rolling mills, hoisting systems and material handling.

Its work covers foundries, steel factories and steel treatment, including panel cutting, rotators, press lines, and drilling and sawing lines. Tell us about your line and we will match the right unit to each drive.

Roll forming

Special units for roll-forming lines

  • AD: a 1:1 spur gear unit with two output shafts, one above the other
  • ADS: worm and spur, drivable from either side, ratios 7.5:1, 15:1 and 30:1
  • ADK: two input shafts on one axis, so a row of units runs from one or two motors
  • All three are supplied without a motor

I-MAK ranges

I-MAK ranges for steel and metal processing

Start with the roll-forming units, then the drives around the line. Each range page has the full size tables and downloads.

I-MAK ADK gear unit for roll forming

Roll forming

ADK gear units

Twin input units that sit in a row along a roll-forming line, ratio 1.812:1.

I-MAK AD series special gear unit

Special

AD, ADS and IRAEM gear units

AD spur units and ADS worm and spur units, each with two output shafts for the upper and lower rolls.

I-MAK YP parallel shaft geared motor

Parallel shaft

YP parallel shaft geared motors

Parallel shaft geared motors for conveyors, hoist drives and crane travel drives.

I-MAK IRC hoist drive geared motor

Lifting

IRC hoist drive geared motors

Hoist drum drives for cranes, for loads from 0.5 to 75 t.

I-MAK MA monobloc gear unit

Monobloc

MA and MK monobloc gear units

Monobloc gear units up to 70,000 Nm for heavy, continuous duty.

Not sure which?

Tell us the duty

We will choose the range and size for you.

  • Torque and speed at the output
  • Hours per day and starts per hour
  • How the unit is mounted
  • Or the nameplate, if you are replacing one

Applications

Where I-MAK units work in steel and metal

The machines I-MAK names for the steel industry.

Blue I-MAK gear units along a roll-forming line

Roll forming

Roll-forming lines with AD, ADS and ADK units. I-MAK names the ADK and ADS for steel and aluminium profiles, pipes and cable trays.

Red I-MAK gearboxes on a sheet metal processing line

Panel cutting and press lines

Drives for panel cutting and press lines.

Roller conveyors in a steel production hall

Heavy-duty conveyors

Conveyors that move steel through the plant, with YP geared motors.

A metal bandsaw driven by a red I-MAK geared motor

Drilling and sawing lines

Geared motors for drilling and sawing lines.

Before you choose

What we need to know about your line

Roll-forming and steel plant drives are often matched to an existing layout. These details help us choose the right unit first time.

The line layout

How many stands, the shaft centres, and whether the units are driven in a row from one motor.

Torque and speed

At each output shaft, and the motor power and speed driving the line.

The duty

Hours per day, continuous or stop-start running, and any shock loads from the process.

The existing unit

If you are replacing a gearbox, the type code from the nameplate, photos, and the shaft and mounting dimensions.

Let’s find your gearbox

Need a gearbox for a steel or roll-forming line?

We just need three details.

Replacing one? Send us the type code from the nameplate and a photo, and we will work from those.

1

Machine

The line or machine, and what each gearbox drives.

2

Duty

Torque and speed at each output, and hours per day.

3

Type code

From the nameplate, if you are replacing a unit.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Steel and roll-forming questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-drives.com.

The AD, ADS and ADK ranges. The AD is a 1:1 spur gear unit and the ADS a worm and spur unit, each with two output shafts. The ADK has two input shafts on one axis, so a row of units can run from one or two motors.

No. The AD, ADS and ADK are supplied without a motor and are driven through their input shafts. Tell us the motor and line speed and we will check the ratio.

Yes. The IRC is built to drive crane hoist drums, for loads from 0.5 to 75 t, and the YP is used for hoist and crane travel drives.

Often, yes. Send us the nameplate details, the shaft and mounting dimensions, and photos, and we will check whether an I-MAK unit fits.