Home › Sectors › Water and wastewater
Gearboxes for Water and Wastewater
Drives for aerators, mixers and pumps, from the official UK supplier of I-MAK.
Home › Sectors › Water and wastewater
Drives for aerators, mixers and pumps, from the official UK supplier of I-MAK.
I-MAK gearboxes for the whole treatment cycle, from primary to secondary treatment: 4DS units for aerators, mixers and agitators, and drives for pumps, dryers and rotating discs.
Water and wastewater
Water quality matters to cities and industrial areas alike. I-MAK supplies products for the whole treatment cycle, from primary to secondary treatment, and has developed solutions for water and waste treatment for more than 50 years.
I-MAK designs these drives for outdoor conditions, reduced maintenance costs, and easy assembly and maintenance. Several of its ranges, including the YP, offer paint systems for EN 12944 corrosion categories C2 to C5, and the 4DS has epoxy and anti-corrosion paint options.
For aerators, mixers and agitators, I-MAK makes the 4DS: three sizes up to 18,547 Nm, with forced lubrication and five cooling options available.
Where I-MAK works
I-MAK ranges
Start with the 4DS for aerators and mixers. Each range page has the full size tables and downloads.
Aerators and mixers
I-MAK’s gear units for aerators, mixers and agitators in water and waste treatment, up to 18,547 Nm.
Helical, inline
Inline helical geared motors that I-MAK names for pumps and mixers.
Planetary
Planetary gearboxes; I-MAK’s load classification tables include water treatment aerators and screw pumps.
Parallel shaft
Parallel shaft geared motors, with EN 12944 C2 to C5 paint systems for outdoor plant.
Not sure which?
We will choose the range and size for you.
Applications
The machines I-MAK names for water treatment: aerators and mixers, pumps, dryers and rotating discs.

4DS gear units for aerators, mixers and agitators.

Geared motors for pumps across the treatment cycle.

Drives for dryers and rotating disc units, from primary to secondary treatment.
Before you choose
Treatment works drives run outdoors and around the clock. These details help us choose the right unit.
The site and its exposure, so we can choose the paint system, seals and motor.
The impeller or rotor, its speed, and the loads on the output shaft.
Hours per day, starts per hour, and whether it runs continuously.
If you are replacing a gearbox, the type code from the nameplate and photos.
Let’s find your gearbox
We just need three details.
Replacing one? Send us the type code from the nameplate and a photo, and we will work from those.
1
The aerator, mixer or pump, and how the drive is mounted.
2
Torque and speed at the output, and hours per day.
3
From the nameplate, if you are replacing a unit.
Prefer us to call you? Request a callback.
FAQs
Anything else? Call +44 (0)1535 655151 or email sales@advanced-drives.com.
The 4DS, I-MAK’s gear unit for aerators, mixers and agitators in water and waste treatment. It comes in three sizes, 480, 615 and 750, up to 18,547 Nm.
I-MAK designs its water treatment drives for outdoor conditions, and several ranges, including the YP, offer paint systems for EN 12944 categories C2 to C5. Tell us the site conditions and we will choose the paint, seals and motor.
Yes. I-MAK names its IR inline helical geared motors for pumps and mixers. Send us the pump speed and power and we will size the unit.
Often, yes. Send us the nameplate details, the shaft and mounting dimensions, and photos, and we will check whether an I-MAK unit fits.