Home › Products › AD, ADS and IRAEM series

I-MAK AD, ADS and IRAEM Series Special Type Gear Units

Twin output shaft gear units for roll forming, up to 8,000 Nm.

Foot mounted gear units with two output shafts, one above the other, designed by I-MAK for roll-forming machines, plus the IRAEM range. Genuine I-MAK units, supplied and supported from Silsden, West Yorkshire.

Get a priceSend us your nameplate details
I-MAK AD series special gear unit

8,000Nm

Maximum torqueFor the AD 230 and AD 250.

6sizes

AD and ADS sizesThree AD sizes and three ADS sizes.

1:1

AD ratioA spur gear unit for roll forming.

30:1

ADS ratios7.5:1, 15:1 or 30:1, with a worm stage.

Overview

The I-MAK AD and ADS: gear units built for roll forming

I-MAK designed the AD and ADS series for the roll form industry. Both are foot mounted, with two solid output shafts, one above the other, to drive the upper and lower roll shafts of a forming station.

The AD is a spur gear unit with a 1:1 ratio, in three sizes up to 8,000 Nm. The ADS adds a worm stage, for ratios of 7.5:1, 15:1 or 30:1, and its input shaft comes out of both sides, so it can be driven from either side. On the ADS 185 and ADS 230 the two output shafts can also be built to run at different speeds, as a forming line often needs the upper roll to turn more slowly.

The IRAEM is a separate range that I-MAK lists with torques from 90 to 1,800 Nm and shaft diameters from 20 to 120 mm. I-MAK publishes no further detail, so if an IRAEM may suit your machine, send us your torque, speed and shaft sizes and we will ask I-MAK for you.

Advanced Drives is the official UK supplier of I-MAK gearboxes and motors. If your machine needs something outside the standard range, read our guide to custom gearbox solutions.

Which I-MAK gearbox?

Choose the AD or ADS for twin-shaft roll forming drives

Key advantages

Why choose an I-MAK AD or ADS

Made for roll forming

I-MAK designed both the AD and the ADS for the roll form industry.

Two output shafts

Upper and lower solid output shafts, one above the other, on a foot mounted housing.

Up to 8,000 Nm

Three AD sizes from 300 to 8,000 Nm, and three ADS sizes from 1,465 to 6,850 Nm.

Drive from either side

The ADS input shaft comes out of both sides of the housing.

Different roll speeds

On the ADS 185 and ADS 230, the two output shafts can be built with a set speed difference.

Options to suit the line

Special shafts, couplings, seals, bearings, oils and paint, set by option code on the ADS.

360° view

↻ Click and drag to rotate

Technical data

I-MAK AD, ADS and IRAEM technical specifications

Three AD sizes and three ADS sizes, all supplied without a motor. I-MAK prints the torque figures as maximum torque; the right size for your line depends on its load, hours and starts, and we check that for you.

Size Maximum torque (Nm) Output shaft centres (mm) Shaft diameters (mm)
AD 180 300 180 30
AD 230 8,000 230 80
AD 250 8,000 250 80
ADS 185 1,465 185 Output 50, input 48
ADS 230 4,820 230 Output 80, input 55
ADS 290 6,850 288 75 and 70
IRAEM 90 to 1,800 Not published 20 to 120
Common to every size AD and ADS series
AD gearing Spur gears, ratio 1:1
ADS gearing A worm stage and spur gears, with ratios of 7.5:1, 15:1 and 30:1
Outputs Two solid output shafts, one above the other
ADS input A worm input shaft out of both sides, so the unit can be driven from either side
ADS output speeds Ratio differences between the two output shafts from 1.000 to 1.486, on the ADS 185 and ADS 230
ADS housing Monobloc, in cast iron
Mounting Foot mounted
Motor Supplied without a motor
Lubrication CLP mineral or CLP HC synthetic gear oil, with the grade chosen for the operating temperature
Oil changes After the first 500 hours, then every 6,000 operating hours
Corrosion protection Paint systems for EN 12944 categories C2 to C5

Maximum torques are from I-MAK’s Gearboxes and Drives catalogue 2026, Rev.00, the only I-MAK catalogue that covers the AD; ADS drawings, options, oil and maintenance are from the I-MAK ADK and ADS catalogue 2024, Rev.00, which gives an older ADS range of 1,465 to 2,400 Nm, so we confirm ADS ratings with I-MAK for each order. Shaft sizes and centres were read from I-MAK’s dimension tables and drawings, where the ADS 290 drawing shows a 75 mm and a 70 mm shaft, and the IRAEM figures are from I-MAK’s product page.

Options

Options and configurations

I-MAK publishes these option codes for the ADS. Ask us about the same options on an AD or an IRAEM.

Output shafts

Special dimensions or materials, hardened, threaded or multiple key shafts, or a coupling connection.

Input shafts

The same choices on the input side: special dimensions or materials, hardened, threaded or multiple key shafts, and coupling connections.

Ratios and gears

Ratios of 7.5:1, 15:1 or 30:1 on the ADS, and special gears or ratios outside the catalogue to order.

Upper and lower speeds

On the ADS 185 and ADS 230, a set ratio difference between the two output shafts, in steps from 1.000 to 1.486.

Seals and covers

Fluoroelastomer (FKM) seals, and seals or covers in special sizes or configurations.

Bearings

Reinforced input or output bearings, or bearings of special dimensions.

Oil

Synthetic or food-compatible oil, or a low temperature oil for use down to -40 °C, all ISO VG 220.

Housing and paint

A specially machined housing or special housing material, and epoxy, acrylic, water based or anti-corrosion paint, and special paint colours.

Applications

Where AD and ADS gear units work

I-MAK designed the AD and ADS for roll-forming machines, where a forming station often drives an upper and a lower roll shaft.

Steel coils waiting to be processed

Roll forming

Forming stations with upper and lower roll shafts

Steel and aluminium profiles

Roll-forming lines for steel and aluminium profiles

Pipe and tube

Roll-forming lines for pipes

Cable trays

Roll-formed cable tray lines

Automotive

Roll-formed parts for the automotive sector

Sheet metal forming

Sheet metal forming and processing lines

Downloads

I-MAK AD, ADS and IRAEM downloads

Current documents and tools from I-MAK. No forms, no sign-up.

ADK and ADS catalogue

2024, Rev.00 · ADS sizes, options and dimensions · PDF

Download

Gearboxes and Drives catalogue

2026, Rev.00 · AD and ADS pages, with dimensions · PDF

Download

Operating guide

General I-MAK operating guide, 2024 · Oil and maintenance, in four languages · PDF

Download

Online configurator

I-MAK iGuide, for choosing a gearbox online

Open

Dimension drawing

For your exact size and options · On request

Ask us

Can’t find it?

Need the drawing for your exact unit?

Send us the size from the nameplate, or your torque, speed and shaft centres, and we will send the right drawing.

Replacing a gearbox

Replacing an existing AD or ADS

Start with the nameplate. Send us its details, with a few photos and measurements, and we will match the replacement.

Read the nameplate

Note the series and size, such as ADS 230, the ratio and the serial number. I-MAK publishes no full type code for these series, so every detail on the plate helps.

What to send us

The nameplate details, photos of the unit, shafts and mounting, the distance between the output shafts, and what the line makes.

Mounting position

AD and ADS units are foot mounted. Tell us which side the drive comes in from and the height of the shafts above the base, so the replacement lines up with your stand.

Replacing another make

We supply replacements for many other gearbox brands. Send us the shaft sizes, the distance between the output shafts, the foot fixing dimensions and the torque, and we will check the fit.

Spares and repairs

Ask us for I-MAK spares such as seals and bearings; the ADS parts list in I-MAK’s catalogue helps identify them. Need a repair rather than a replacement? Call us and we will talk it through.

Identification

How to identify an AD or ADS

  1. Series: AD for the spur gear unit, ADS for the worm and spur gear unit
  2. Size: a three-figure number, such as 230
  3. Ratio: 1:1 on the AD; 7.5:1, 15:1 or 30:1 on the ADS
  4. Shaft speeds: on an ADS, any ratio difference between the two output shafts
  5. Shaft centres: the distance between the upper and lower output shafts, in mm
  6. IRAEM: send the full nameplate, as I-MAK publishes no size list

Let’s find your gearbox

Looking for an AD, ADS or IRAEM gear unit or a price?

We just need three details.

Replacing one? Send us the details from the nameplate and a photo, and we will work from those.

1

Torque

Continuous and peak, at the output shafts.

2

Speeds and ratio

Input speed, output speed or ratio, and any speed difference between the upper and lower shafts.

3

Shafts and layout

The distance between the output shafts, the shaft sizes, and which side the drive comes in from.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

I-MAK AD, ADS and IRAEM questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-drives.com.

The AD is a spur gear unit with a 1:1 ratio, in three sizes up to 8,000 Nm. The ADS adds a worm stage, for ratios of 7.5:1, 15:1 or 30:1, and its input shaft comes out of both sides, so it can be driven from either side.

On the ADS 185 and ADS 230, yes. I-MAK publishes ratio differences between the two output shafts in steps from 1.000 up to 1.486, as a forming line often needs the upper roll to turn more slowly. Tell us the speeds you need and we will check which step suits.

A range that I-MAK lists with torques from 90 to 1,800 Nm and shaft diameters from 20 to 120 mm. I-MAK publishes no further detail, so send us your torque, speed and shaft sizes and we will ask I-MAK whether an IRAEM suits.

No. I-MAK supplies these units without a motor, so they are driven from your line’s own motor or drive shaft. We can supply I-MAK motors and geared motors separately.

For the ADS, I-MAK lists CLP mineral or CLP HC synthetic gear oils, with the grade chosen for the operating temperature, and food-compatible and low temperature oils as options. I-MAK’s maintenance instructions call for an oil change after the first 500 hours, then every 6,000 operating hours.

Often, yes. Send us the shaft sizes, the distance between the output shafts, the foot fixing dimensions and photos, and we will check whether an AD or ADS fits.