Home › Replacement gearboxes

Replacement Gearboxes and Geared Motors

Matched from the nameplate, by the official UK supplier of I-MAK.

Send us the nameplate and a few photos of the gearbox you need to replace, and we will look for an I-MAK unit that fits, including for many gearboxes from other makers.

Send us your nameplate detailsCall +44 (0)1535 655151
I-MAK IRK helical bevel geared motor

How it works

From failed gearbox to the right replacement

Most replacements start with a photo of the nameplate. The more we know about the unit you have, the faster we can match it.

1. Send us the nameplate

The make and type code, the ratio and motor power, and photos of the nameplate, shafts and mounting.

2. We check the fit

Shaft sizes, mounting dimensions and centre height, and the output speed and torque the machine needs.

3. You check the drawing

We send the drawing for the I-MAK unit, so you can compare it with the one you have before you order.

4. We supply and support it

Then the unit, and spares such as seals and bearings for as long as it runs.

Which I-MAK range?

Start with the type you have

The layout of the unit you are replacing points to the I-MAK range to start from. We then check the size, ratio and dimensions.

The unit you have I-MAK range to start from
Inline helical, motor in line with the output IR
Parallel shaft, often with a hollow output YP
Helical bevel, right angle IRK
Worm or helical worm, right angle S, IRS or IRSD
Shaft mounted, hung on a conveyor shaft IRO or IRNX
Crane hoist drum drive IRC
Large industrial or monobloc unit A and AE, MA and MK
Planetary, very high torque IPR and IPRK

Send us these

What we need to match it

  • The make and type code from the nameplate
  • The ratio, output speed and motor power
  • Photos of the nameplate, shafts and mounting
  • Shaft diameters and mounting dimensions, if you can measure them
  • What it drives, and how soon you need it

Before you order

Three things we check with you

Dimensions

Shaft heights and mounting holes can differ between makes. That is why we send you the drawing to check before you order.

Motors

Several I-MAK ranges, including the IRK, can take an IEC motor through an input flange, so you may be able to keep the motor you have.

Drawings and 3D models

I-MAK’s iGuide finds drawings and 3D files by type code, or we send the drawing for your exact unit.

Replacing a gearbox?

Send us the nameplate and we will look for a match

We just need three details.

Replacing one? No nameplate? Send photos from several sides and the shaft and mounting dimensions instead.

1

Machine

What it is, and what the gearbox drives.

2

Nameplate

The make and type code, with a photo.

3

Timescale

How soon you need the replacement.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Replacement questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-drives.com.

Often, yes. Send us the nameplate details, the shaft and mounting dimensions, and photos, and we will check whether an I-MAK unit fits.

Often, but not always. Before you order, we send you the drawing for the I-MAK unit, so you can check the shaft sizes, mounting holes and centre height against the one you have.

Often, if it is an IEC motor. Several I-MAK ranges, including the IRK, can take an IEC motor through an input flange. Send us the motor nameplate too and we will check it.

Send us photos of the gearbox from several sides, the shaft diameters, the mounting dimensions, and the output speed and motor power if you know them. We can often work from those.

Yes. Ask us for I-MAK spares such as seals and bearings. Send us the type code from the nameplate and we will identify the parts.