Gearboxes for Conveyors and Material Handling
Shaft mounted gearboxes and geared motors for every kind of conveyor, from the official UK supplier of I-MAK.
Shaft mounted gearboxes and geared motors for every kind of conveyor, from the official UK supplier of I-MAK.
I-MAK drives for belt, bucket, screw and roller conveyors, apron feeders and handling equipment: shaft mounted units with a backstop option, and inline, parallel and right-angle geared motors.
Conveyors
Conveyors run in almost every sector we supply, from quarries and recycling plants to grain stores and food lines. I-MAK makes drives for all of them.
I-MAK calls its IRNX shaft mounted gearbox the best solution for conveyors and grain storage, and its IRO the best solution for quarries and mining. Both hang on the conveyor shaft, take a backstop for inclined conveyors, and have housings designed for easy cleaning and dust resistance. The IRNX uses rubber rings as a torque arm, to absorb shocks and vibration.
Where a geared motor suits the layout better, the IR runs in line with the shaft, the YP is a compact parallel shaft unit with a hollow output, and the IRK gives a right-angle drive.
I-MAK ranges
Each range page has the full size tables, options and downloads.
Shaft mounted
Twelve sizes up to 42,700 Nm for belt, bucket and screw conveyors, apron feeders and roller beds.
Shaft mounted
Shaft mounted units for inclined conveyors in quarries and mines, with a backstop option.
Parallel shaft
Parallel shaft geared motors that I-MAK calls perfect for conveyors, with a hollow output shaft.
Helical, inline
Inline helical geared motors for conveyors and material handling equipment.
Helical bevel
Right-angle geared motors for belt and chain conveyors, with a backstop option for inclines.
Not sure which?
We will choose the range and size for you.
Applications
The conveyors and handling machines I-MAK names across its sectors.

Shaft mounted or geared motor drives for belt conveyors.

IRO and IRNX units with a backstop to stop run-back.

Drives for roller beds and roller conveyors.

IR geared motors for material handling equipment.
Before you choose
With these details we can size the drive and check the options in one go.
Belt, bucket, screw or roller, the load it carries, and the belt speed.
Shaft mounted or foot mounted, and where the motor can sit.
If it is inclined, so we can specify a backstop, and its direction of rotation.
Hours per day, starts per hour, and whether it starts loaded.
Let’s find your gearbox
We just need three details.
Replacing one? Send us the type code from the nameplate and a photo, and we will work from those.
1
The conveyor type, the load, and how the drive is mounted.
2
Belt speed or output speed, the torque, and the incline.
3
From the nameplate, if you are replacing a unit.
Prefer us to call you? Request a callback.
For a drive hung on the conveyor shaft, the IRNX or IRO. For a geared motor, the IR in line with the shaft, the YP parallel shaft unit or the IRK right-angle unit. Send us the conveyor details and we will size it.
Yes. A backstop stops the output turning back when the drive stops. It is an option on the IRO and IRNX shaft mounted ranges and on I-MAK geared motors. Tell us the direction of rotation.
The conveyor type and load, the belt speed, the pulley diameter, the incline, and the hours per day. Our guide to conveyor torque explains each figure.
Often, yes. Send us the nameplate details, the shaft and mounting dimensions, and photos, and we will check whether an I-MAK unit fits.